Installing a Bathtub

Installing a bathtub will need at least two persons to do it. The process involves counting, marking, installing, and fixing. This process beginning with measuring of the bathtub and your bathroom side in which this bathtub will be placed on. Assistance here helps you to measure the correct count for a bathtub installation. You will need some equipment such as pencil, pipes, screwed, and cement backer board. You better to prepare it well before the new bathtub installed.

Please make sure that this bathtub is in the correct aligning position so is the pipe. Installing a bathtub is long process, you have to be sure that this pipe is in the right position to drain the water into this bathtub. After the bathtub is on the right aligning position, lay up this bathtub, and put the shrimp, in order to stabilize the position. Make the final position of this bathtub, and then connect it with the hanger. Now, you may connect the drain with the water supply from pipes. Make sure that it is tight enough. Use screwed to fix it. This bathtub installation is the matter of correct measurement.

Installing a bathtub is a complicated process. Some adjustment of turnbuckle is needed here to make sure that the drain opening in seat properly in the bottom of the bathtub. Now, you can adjust the hot and cold water drain, use the joint compound. Fix this position by using screwed. Make it tight enough. Don’t forget to screw the hot and cold handle as well. At last, measure the right adjustment for wall positioning on the bathtub. If you feel that you are not suit enough of this bathtub position facing the wall, please remove and change the adjustment. You should be comfort enough while you are taking a bath and keep yourself safe.